Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser utilizes modern technology to stop car theft. This hidden device is not noticed by thieves and only turns on the engine when a PIN or app is entered.
It is weatherproof and connects to the CAN data network of your vehicle. It features a service/valet function that lets you temporarily start your vehicle when it is in the garage.
Easy to install
The Ghost immobiliser is a cutting-edge security gadget that shields your vehicle from cloning, hacking, and key theft. It utilizes a PIN code system that is integrated into your vehicle's electronic control unit, making it impossible for thieves to recognize. In contrast to traditional immobilisers, it doesn't require special keys or sensors and is completely hidden without any LED indicators or signals to signal its presence. It is also cheaper than replacing an ECU or installing a new key fob and could lower the cost of your monthly insurance.
Follow the instructions of the manufacturer when installing the Ghost 2 vehicle immobiliser. This will ensure that the device is working correctly and effectively. Test the system after installation by entering the PIN and then starting the car. Regular testing will enable you to identify any problems early on.
Double-check the location of CAN H and L wires prior to starting the installation. These are crucial to powering the immobiliser, so it is important to ensure that they are connected correctly. Labeling the wires will make it easier to find them during installation. Once you have identified the locations of these wires and connected them to a continuous 12V power source and an earthing point. Be sure to use a fuse tap if necessary to protect the connections from damage or short circuits.
After connecting the wires, tidy the wires with cable ties to avoid interference. You can also cover the connections with insulation tape or heat-shrink tubing. This will help protect them from electrical shorts and extend the life span of the device. Once the wiring is secure, it's a good idea to test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode for situations in which you might need to sell your vehicle, such as when it is being repaired or parked by a valet. This will disable the PIN sequence for a short period of time. To activate this feature, simply press the brake pedal while holding the accelerator, a number of times equal to the first digit of the emergency code. The system will then go into service mode, which can be verified by flashing the indication signal five times.
ghost immobiliser price is simple to change PIN codes
Ghost 2 immobilisers are an excellent way to safeguard your car from thieves. It is concealed inside the vehicle, and is only accessible with a code. The device communicates directly with the vehicle ECU via its data bus, and does not rely on radio frequency signals as do traditional Thatcham immobilisers, or aftermarket alarm systems. This makes it difficult for thieves to detect the sound of an immobiliser relay, or to add new key fobs. The control unit is concealed within the vehicle's wiring harness or dashboard and is not physically accessible to reset the system.
The ghost 2 immobiliser is connected to your vehicles CAN Data network and utilizes existing buttons on the steering wheel, door panels and the centre console to create a customisable sequence of up 20 button presses that must be entered prior to the engine can begin similar to a PIN code. This unique next generation system does not require cutting of wires during installation and can be reprogrammed at any time. You can also start your vehicle in either Service or Valet mode after you hand it to a mechanic to complete the work.
You can also make use of the app to change your PIN number or disable it completely if lost your keys. This feature is especially useful when you've given your car to someone else for parking or valet service. It will stop them from starting the car and then driving it off without your permission. It's also inaccessible to professional thieves because it doesn't utilize radio frequencies or circuit cuts.
Another excellent feature of the ghost 2 immobiliser is its capability to prevent thefts of relays. Relay theft is a popular method of car theft in which criminals attack the diagnostic port of your car, then modify the signal sent by the key to the vehicle's ECU in order to fool it into believing that there is a valid key. The immobiliser of the traditional model can be bypassed in this way, but with the ghost 2 immobiliser the signal is blocked by the immobiliser before it reaches the ECU.
Easy to use app
Ghost 2 is an immobiliser that is revolutionary. It safeguards your vehicle from key-cloning. It works by connecting to your vehicle's CAN data network and demanding that you enter a PIN number before it will start the engine. It also stops thieves from using signal spoofing and device spoofing, which are both common techniques used to steal vehicles.
The system is easy to use and functions as an ordinary auto alarm. The installation of the system allows you to create an individual 20-digit PIN code that must be entered before starting the vehicle. This will protect the vehicle from being taken even if your keys get stolen. If you want to deactivate the system, you can do so via an app on your smartphone.
Unlike other systems, the ghost is silent and doesn't emit any radio frequency signals. It is a weatherproof and discreet device that can be placed anywhere in your vehicle. It can be hidden under the dashboard, steering wheel or door panels. It communicates via the CAN data loop to your ECU and is not affected by the diagnostic tools used by thieves to identify security systems. It is also not affected by jamming devices that alter codes.
It is a covert installation that doesn't require any wire cutting or modification to the vehicle it can be utilized as an anti-theft system for all vehicles. Its technology has been proven be effective and complies with TASSA standards. The ghost is a great solution for classic, sports and luxury cars, and it can be used to safeguard cars that are rented out on apps like Turo.
The Autowatch Ghost 2 is the next generation of vehicle immobilisers. The system is unnoticeable to thieves and stops them from starting your car unless they have your PIN or are authorized by the app. It also doesn't emit radio frequencies or other signals that could be detected by scanners. Installation is quick and easy. The app is user-friendly with a simple interface and simple navigation. It also includes an GPS tracker that will help police locate the vehicle and then recover it.
Easy to reset
A ghost 2 immobiliser is an excellent way to safeguard your vehicle from theft. It integrates with your vehicle's ECU to create a security barrier that thieves cannot breach without the correct PIN. The device is also TASSA-certified which means it is acknowledged by insurance companies. It's an effective device to prevent car theft, and will save you a lot of money in the long run.
Contrary to traditional alarms/immobilisers which require cutting of circuits for circuit cutting, the Ghost system is directly connected to the vehicle's CAN network. It works by using the buttons you already have on the dashboard as well as the steering wheel. You can set up an individual PIN sequence that is up to 20 presses long. This PIN has to be entered before the engine can be started the same way as the credit card PIN. The Ghost system is invisible to thieves and there aren't LEDs to indicate its presence. This makes it the most effective aftermarket CAN-bus immobiliser available today.
Another benefit of the Ghost system is that it does not use radio frequency signals, which means it isn't scannable or intercepted by thieves. This helps to prevent relay attacks and keys that are cloned, as well as the more popular method of hacking into a car's CAN bus system, by scanning for signals from the alarm or immobiliser. The Ghost system is designed in a way that it is able to be hidden within your vehicle. There are no lights, or other indicators to show its presence.
The system also comes with an option for a Transport Mode that disables the Ghost system, which is useful for situations where you need to temporarily deactivate it, for instance, when you are traveling or performing maintenance. However, this mode is not as effective as Service Mode, as it does not deactivate the system when your vehicle speeds over 31 mph for 15 minutes.
To reset your ghost 2 immobiliser you'll need the emergency code, which is available from your installer. The code is typically hidden under the scratch-off area of the card provided with the installation. This emergency code should be kept safe and stored in a secure place like a wallet at home.